Posted on

Replacing Your Sliding Doors With French Doors

Usually, that leads to a patio or backyard, sliding or French doors allow plenty of sunlight in while giving you a personal view and access to the outdoors. The sliding glass door just fine and perform basic functions but can be seen as outdated and plain.

A pair of French doors open fully to the outside and add charm and elegance to the room. If you are looking for a door fitting in Oshawa then you can explore various online sources.

Follow these steps to replace the sliding doors with French doors.

1. Take measurements of your old door and buy your French

It is a good idea to buy before you start any work to remove the existing door, because you may have to wait several weeks or longer for them to arrive. In order to buy the right size of door replacement, you will need to measure the height and width of the sliding door there.

2. Remove your old sliding door

Once the new door you have arrived, you can get to work replacing your door. Dismantling the existing trim and molds lose with a hammer. The track and the rest of the unit will be exposed to the sliding door.

3. Remove the rest of the sliding door unit

Remove all nails holding the jambs, header, and track in place. This unit should be easily separated. Jambs side tend to require more work to clear, and you have to be careful to not damage the walls that surround the door frame.

4. Place the French doors in the opening and assess the fit

Do not remove the clip or strap that holds your new door aligned and closed. The unit is in the middle of the door in the opening and position it into place. Using a level, assessing if the unit door even and plumb.

5. Secure the new entrance to the premises

Attach the unit to the opening frame using three nails on each jamb. Nail every shim to the jambs or frames. Securing doors on hinges, remove the clip or strap attached to the door, and test their swinging motion.